EVENTURI Carbon Intake System
Fitment for BMW X2 M35i F39
60 -130 mph Reduced By 0.2 seconds
Eventuri intake system for the BMW X2 M35i F39 was developed through extensive real world testing and airflow simulation analysis.
Eventuri intake has been developed to provide the turbo with a less restrictive flow path whilst maintaining low inlet temperatures.
Crafted from Prepreg Carbon Fiber, the airbox serves 2 objectives – to seal the filter against engine bay heat and to provide a dual cold air feed.
The filter housing comprises of our bespoke generation 2 filter, aluminium inlet cowl, stainless steel bracket and the integrated MAF section. The carbon pod shrouds the reverse mounted filter and smoothly shapes the airflow down to the MAF section which then connects to the stock inlet tube. This changes the flow path from the OEM airbox where airflow enters the front of the airbox, changes direction by 90 degrees to travel through the panel filter and then changes direction again by 90 degrees to move through the MAF section.
Couple the dAHLer engine performance tuning increase with a more audible and sonorous induction sound of your BMW X2 M35i F39 and the overall driving experience is much more involving and more fun.
Each Eventuri intake system for BMW X2 M35i F39 consists of:
– Carbon Fiber Venturi Housing with Integrated MAF Tube
– Bespoke High Flow Generation 2 Filter
– Carbon Fiber Sealed Duct
– Aluminium Inlet Cowls
– 2 x Laser Cut Stainless Steel Bracket Work
Why Eventuri Intake?
EVENTURI INTAKE SYSTEM
The Eventuri carbon intake system for the BMW X2 M35i F39 is a new type of intake design, which has been granted a patent. Eventuri uses a cone filter – but here it is inverted and decoupled from the inlet tube. By removing the direct connection between the filter and the inlet tube, the filter is no longer dictating the shape of the airflow. This is now being done by the carbon housing, which is designed to smoothly guide the air into the inlet tube without a sudden change in geometry.
This means that Eventuri keeps laminar conditions throughout the intake, which is a lot more efficient. Furthermore, the funnel-shaped housing invokes the Venturi effect where the smooth reduction in cross-sectional area along the length of the housing causes the airflow to increase in velocity. Essentially the entire housing acts as a large velocity stack. On the road this translates to more power with a smoother delivery as well as sharper throttle response since the airflow is not inhibited by abrupt geometry changes.
RESULTING IMPROVEMENTS FOR BMW F40 M135i, F44 M235i, F39 X2 M35i
Dyno testing the Eventuri intakes back-to-back with the original filter vs the upgraded filter, Eventuri has found an additional power and torque increase for tuning the BMW X2 M35i F39, like an engine performance tuning module. This validates our theoretical modelling and proves that the upgraded filters really have a significant impact on the airflow through the intake. The power gains over and above the original filters vary between vehicles, but here are some of the results Eventuri has measured so far.
All Eventuri parts delivered by dAHLer Competition Line come with the official Eventuri warranty.